If your AMICA oven keeps turning off during use, it can be frustrating and difficult to rely on.
It may start heating normally, then suddenly stop without warning.
This is a relatively common issue and usually means there is a problem with how electricity is flowing inside the oven.
What could be causing this problem?
1. Worn selector switch
The selector switch controls the different cooking functions. Over time, the internal contacts can wear out, leading to unstable or interrupted power flow.
👉 Typical signs:
- The oven cuts out during cooking
- It works again after adjusting the dial
- The issue becomes more frequent over time
On Amica ovens, the selector switch is clipped onto the rear of the thermostat and is a known cause of intermittent faults. Models in the 508 and 6001 series are commonly reported with overheated rear contacts that lose connection unpredictably — causing the oven to cut out during cooking and sometimes recover when the knob is adjusted.
2. Internal wiring issue
Damaged or loose wiring connections inside the oven can interrupt the electrical supply, causing the appliance to switch off unexpectedly.
3. Temperature control fault
A faulty thermostat or control component can also lead to inconsistent operation and sudden shutdowns.
If your AMICA oven behaves like this, it’s very likely that one of these parts needs replacing.
You can browse compatible parts here: AMICA SPARE PARTS COLLECTION HERE .
Not sure which part is causing the issue? Contact us and we’ll help you identify it quickly and safely.
Tell us what your oven is doing and we’ll provide a solution 🔧
⚡ We usually reply within minutes.
Need a bit more help first?
If you’d like to understand the problem better before buying, these quick guides can help.